Manual call point CP135

This manual call point «break glass» is certified for use in Atex/explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas,chemical, petrochemical, pharmacy industries, marine and Offshore applications. Manual call point is designed for corrosive environments and hazardous area. The apparatus is compatible with PLC, ESD, DCS systems via output 4-20mA. The test function is built in, visualisation functions, line detection, and glass protection, hammer, are optional.
Housing is molded in Glass-Reinforced Polyester (GRP), dyed in the mass and protected by an UV resistant paint.
A complete range of accessories is available to customize a products.

SPECIFICATIONS
Operating Temperature: -40°C to + 70°C Humidity: Up to 95% RH
Material: UV and Corrosion Resistance GRP (Anti Static GRP Optional)
IP rating: IP66
Type: Break Glass. Test Key Facility
Enclosure Colour: RED: RAL 3001 – YELLOW**: RAL1018 – BLUE**: RAL5005 – BLACK**: RAL9004, BLACK WITH YELLOW ZEBRA**
Power Supply: 24V DC or 100-240V AC
Switch Rating: 250V AC- 11A (Resistive), 6A (Inductive), 30V DC- 6A (Resistive), 6A (Inductive)
Output: On-off Output ( NC/NO) or 4-20mA DC
Certification: NEMKO 13ATEX1568X, IECEX NEM 13.0038X
Marking: II 2 GD, Ex d IIB+H2 T6 Gb, Ex tb IIIC T85°C (Tamb = -40°C … +70°C)
Cable Entry: 4* M20, M25, 1/2” NPT, 3/4”NPT or Others on request
Optional:
– Lift Flap
– LED Indicator
– Resistor and/or diode can be Fixed