explosion-proof floodlight CES-J120/J150/180/J200
Base : Top loading / WM – Wall Mount / PA – Universal Pole Mount / Ring lnstallation
Power (W) : 20W / 30W / 40W
Voltage – Frequency : 100-277Vac 50-60Hz
Color Temp : 5000K (Provides 2700K to 6500K)
CRI (Ra) (typ.) : ≥70
Luminous Flux (lm) : 2400 / 3600 / 4800
Bare Lamp efficacy (LPW) : 120
Beam Angle : 20°, 70°, 90°, 120°
Power Factor : >0.95
Rated Lifetime – L70 (hrs.) : 50,000
Dia. x MOL : 200×200×147mm(7.8×7.8×5.7)”
Housing : ADC12 Aluminum+Explosion-proof glass
Please contact us to know about variation models
Description
• Available from 20W ( 2,000lm ) – 200W ( 24,000lm )
• Offered with 3 mounting options: U-bracket, wall mount，slipfitter mount
• Type II, III, IV, V and Forward Throw distributions
• 1-10V Dimming, standard
• Motion sensor, photocell and Controller options available
• 100,000+Hours LED lifespan
• ATEX IECEX UL844 ( CID2 )
• PSE, SAA, C-TICK, CE, RoHs, DLC, IP66, IK09, UL1598A for marine
Specification
UL, ATEX & IECEX :
Suitable for wet locations
Operating temperature: -40°C to +55°C (-40°Fto 131°F)
LEDS :
Long-life, high-efficiency, micro-power,surface mount LEDs
Drivers(s) :
Class 2, 50/60Hz. 100 – 277V, 4kV standard, 6kV optional surge protection
Lifespan :
100,000+hour LED lifespan based on IES LM-80 results & TM-21 calculations at 25°C
IP Rating :
Ingress Protection rating of NEMA 4/4X (IP66) for dust and water
Housing :
Die-cast aluminum housing
Mounting :
U-Bracket, slipfitter or wall mount options available
Lens :
High transmittance explosion-proof glass
Effective Projected Area :
EPA = 0.61
Vibration Rating :
3G vibration tested per ANSI C136.31
Dimming Driver :
Driver includes dimming control wiring for 1-10V dimming systems. Requires separate 1-10V DC dimming circuit. Dims as low as 10%.(Optional dimming and non-dimming)
CCT :
Available in 2700K-6500K color temperature
CRI :
CRI ≥70
Reviews
There are no reviews yet.