CP150 Manual Call point

This manual call point CP150 «break glass» is certified for use in Atex/explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. CP150 is designed for corrosive environments and hazardous area.
The apparatus is compatible with PLC, ESD, DCS systems via output 4-20mA. The test function is built in, visualisation functions, line detection, glass protection and hammer are optional.
Housing is moulded in Glass-Reinforced Polyester (GRP), dyed in the mass and protected by an UV resistant paint.
A complete range of accessories is available to customize a products.

SPECIFICATIONS
Operating Temperature: -40°C to + 70°C Humidity: Up to 95% RH
Material: GRP
IP rating: IP66
Enclosure Colour: Red, Blue, Yellow, Black/Yellow Stripes , others colour on request
Power Supply: 24V DC or 100-240V AC
Switch Rating: 250V AC- 11A (Resistive), 6A (Inductive), 30V DC- 6A (Resistive), 6A (Inductive)
Output: On-off Output ( NC/NO) or 4-20mA DC
Certification: NEMKO 13ATEX1564X, IECEX NEM 13.0034X
Marking: II 2 GD, Ex d IIC T6 Gb, Ex tb IIIC T85°C (amb T°= -40°C … +70°C)
Cable Entry: 4* M20, M25, 1/2” NPT, 3/4”NPT or Others
Optional:
– Lift Flap
– LED Indicator
– Resistor and/or diode can be Fixed